User Guide for Audio Array AM-C43

User Guide for Audio Array AM-C43

Click Here For User Manual 

Audio Array AM-C43 XLR to 3.5mm Professional Condenser Microphone Kit: User Guide

Welcome to the user guide for the Audio Array AM-C43 XLR to 3.5mm Professional Condenser Microphone Kit. This comprehensive kit is designed for recording, podcasting, streaming, and home studio use. With a durable boom arm, a high-quality condenser microphone, and essential accessories, this kit provides professional sound quality and user-friendly design.

Technical Details

  • Microphone Type: Condenser
  • Diaphragm Size: 16mm
  • Frequency Response: 20Hz to 20kHz
  • Signal-to-Noise Ratio (S/N): 72dB
  • Power Requirement: 48V Phantom Power
  • Connectivity: XLR to 3.5mm
  • Dynamic Range: Wide, for high-end clarity and natural sound

Professional Sound Quality

The Audio Array AM-C43 features a 16mm diaphragm and a professional sound chipset, providing a high sampling rate and a wide frequency response of 20Hz to 20kHz. The enhanced microphone capsule includes a low-noise FET preamplifier, high SPL handling, and a 72dB signal-to-noise ratio, delivering a wide dynamic range for high-end clarity and natural sound.

User-Friendly Design

The kit includes a 70cm boom arm with a desk clamp, made of durable steel for outstanding bearing capacity. The arm provides 360° full rotation for easy access and positioning. The microphone arm stand can support a maximum load of 4lbs (1.8kg). Additionally, the kit includes a shock mount, pop filter, and mic cover for effective noise reduction.

External Power Source Required

Note that condenser microphones require an external power source to function properly. The AM-C43 needs to be connected to 48V phantom power, an audio interface, a mixer, or a preamp. This microphone is designed for studio recording, home studios, podcasting, voice-over work, streaming, and YouTube video production.

Complete USB Mic Kit

The Audio Array AM-C43 Professional Condenser Microphone Kit includes:

  • 1 x Condenser Microphone
  • 1 x Boom Arm
  • 1 x Mic Cover
  • 1 x Pop Filter
  • 1 x 2m XLR to 3.5mm Cable
  • 4 x Cable Ties

Warranty

Enjoy peace of mind with a 1-year warranty against any manufacturing defects. For any other queries, please contact our dedicated customer care team for prompt assistance.

Customer Guidance

Getting Started:

  1. Assemble the Boom Arm: Attach the boom arm to your desk using the desk clamp. Ensure it is securely fastened.
  2. Connect the Microphone: Attach the microphone to the shock mount and then to the boom arm. Position the pop filter in front of the microphone.
  3. Connect to Power Source: Use the 2m XLR to 3.5mm cable to connect the microphone to your audio interface, mixer, or preamp with 48V phantom power.
  4. Position the Microphone: Ensure the microphone diaphragm is facing you (side address) and not the rear or top of the microphone.

Usage Tips:

  • Optimal Sound: Speak directly into the side of the microphone diaphragm for the best sound quality.
  • Noise Reduction: Use the pop filter and mic cover to minimize plosives and background noise.
  • Secure Setup: Make sure all components are securely fastened to avoid any accidents or interruptions during recording.

What You Get

The Audio Array AM-C43 XLR to 3.5mm Professional Condenser Microphone Kit package includes:

  • 1 x Condenser Microphone
  • 1 x Boom Arm
  • 1 x Mic Cover
  • 1 x Pop Filter
  • 1 x 2m XLR to 3.5mm Cable
  • 4 x Cable Ties

Ensure you have all these components before starting your recording sessions with the Audio Array AM-C43 Professional Condenser Microphone Kit. Enjoy professional-quality sound and a user-friendly setup with this comprehensive microphone kit!

 

Reading next

User Guide for Audio Array AM-W14 UHF
User Guide for Audio Array AM-W45

Leave a comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.